Nestabilities - compatability with Die Cutting Systems - older version

Click here to buy Nestabilities

Spellbinders Universal Dies Compatibility

Spellbinders Dies are designed around the Wizard® Embossing & Die Cutting System. However, they

have limited compatibility with other systems.

Please be advised that Spellbinders two-year Warranty on Spellbinders Dies may be voided by using the dies in other systems.

Spellbinders makes no guarantees about the cutting or embossing quality of any system other than the Wizard Cutting System.

Please check the warranty on your die-cutting system before using Spellbinders Dies with it.

Spellbinders or Stamposaurus is not responsible for any damage incurred by using Spellbinders Dies with other systems.

 

CuttleBug ™ by Provocraft®

This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders

Tan Embossing Mat to emboss in Cuttlebug™ machine. 

Cutting Sandwich - (Stack from bottom up)

1. A plate

2. C plate

3. Spellbinders Die (cutting side up) that means the side with the ridges

4. paper or cardstock

5. B plate

6. Run through Cuttlebug™ machine.

Embossing Sandwich-(Stack from bottom up)

*Remove C Plate for embossing sandwich

1. Place A plate on bottom

2. Leave die face up on A plate with die cut still in the die.

3. Place one Spellbinders Tan Embossing Mat on top of the die.

4. Use 2 or 3 pieces of cardstock to shim.

*Cautionary Note: Using more than 3 pieces of cardstock to shim Cuttlebug Embossing sandwich will

result in B Plate breakage. When using Spellbinders Edgeabilities card making dies, shim with only 2

pieces of card stock.

5. Place two acrylic B plates on top of sandwich and run thru Cuttlebug machine to emboss

Spellbinders die cuts.

6. Turn die over and use like a stencil with inks and chalks for added detail.

 

Big Shot® by Ellison Design™ (Blue)

This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders

White Spacer Plate and Tan Embossing Mat to cut and emboss in the Big Shot machine.

Cutting Sandwich - (Stack from bottom up)

1. Place the Big Shots™ thick white mat down first.

2. Place one Spellbinders White Spacer Plate onto the thick white mat.

3. Place Spellbinders Die, cutting side up (that would mean the side with the ridges) onto the white

spacer plate.

4. Place paper over die.

5. Place two Big Shot acrylic mats over paper and roll thru the BigShot™ machine.

Embossing Sandwich-(Stack from bottom up)

1. Remove the Spellbinders Spacer Plate while leaving the die in place.

2. Place Spellbinders Tan Embossing Mat over the paper and die.

3. Shim with 3 pieces of card stock.

4. Place two Big Shot acrylic mats on top of Tan Embossing Mat and roll thru Big Shot machine.

5. Turn die over and use like a stencil with inks and chalks for added detail.

 

Big Shot™ (Black & Pink) by Ellison-Sizzix® and Big ShotTM for Stampin Up by Sizzix®

This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders

two Tan Embossing Mats to cut and emboss in the Big Shot™ machine.

Cutting Sandwich - (Stack from bottom up)

1. Place large platform down first with all tabs closed.

2. Place Spellbinders die face up, (that would mean ridges or bumpy side up).

3. Place card stock on Spellbinders die.

4. Place two Big Shot™ acrylic mats on top of cardstock.

5. Roll thru Big Shot™ machine to die cut shape.

Embossing Spellbinders Dies in the Big Shot™ by Ellison-Sizzix® and Big ShotTM for Stampin

Up by Sizzix®

Embossing Sandwich-(Stack from bottom up)

1. After cutting, remove acrylic mats from cardstock and die.

Leave the Spellbinders die in place with paper die cut out still in the die on the multi-purpose platform.

2. Place TWO Spellbinders Tan Embossing Mats on top of die.

3. With one piece of 12x6 card stock tri-fold for a shim and place on top of the Tan Embossing Mats.

4. Place ONE Big Shot acrylic plate on top and run thru the Big Shot machine.

 

Big Kick™ by Sizzix®

This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders

two Tan Embossing Mats to cut and emboss in the Big Shot™ machine.

Cutting Sandwich - (Stack from bottom up)

1. Place large platform down first with all tabs closed.

2. Place Spellbinders die face up, (that would mean ridges or bumpy side up).

3. Place card stock on Spellbinders die.

4. Place two Big Kick™ acrylic mats on top of cardstock.

5. Roll thru Big Kick™ machine to die cut shape.

Embossing Sandwich-(Stack from bottom up)

1. After cutting, remove acrylic mats from cardstock and die.

Leave the Spellbinders die in place with paper die cut out still in the die on the multi-purpose platform.

2. Place TWO Spellbinders Tan Embossing Mats on top of die.

3. With one piece of 12x6 card stock tri-fold for a shim and place on top of the Tan Embossing Mats.

4. Place ONE Big Kick acrylic plate on top and run thru the Big Kick machine.

 

Zip’eMate™ by Accucut®

This machine is capable of cutting and embossing any Spellbinders Die.

How-To Use a Spellbinders Die in the ZEM:

1. Place a Spellbinders Die on ZEM’s platform, blade side up.

2. Place paper over die and cut in the same manner as with Zip’e Cuts.

3. After cut, do not remove the die or the paper from the platform.

Place ZEM’s Embossing Foam over paper and with the ZEM’s Embossing Mat,

roll thru again to emboss the die-cut.

 

Original Sizzix® Press

Ellison® manufactures the Sizzix® System Converter. You will need to use the system converter along

with Spellbinders Spacer Plate and Tan Embossing Mat (Item# W 020) to cut and emboss Spellbinders

Dies.

How-To

Cut Spellbinders Dies in the Sizzix® Machine:

1. Place the Sizzix® System Converter into the Sizzix® Machine.

2. On the Cutting Pad, place paper to be cut, then Spellbinders Die, ridges down.

3. Place the Spellbinders Spacer Plate (Item# W 004) over the Spellbinders Die.

4. Use a 12x6 piece of cardstock and tri fold to use as a shim.

Place shim on top of Spellbinders Spacer Plate.

5. Push through Sizzix® Machine to cut.

How-To

Emboss Spellbinders Dies in the Sizzix® Machine:

1. After Cutting Die in Sizzix® Machine, remove paper shim and spacer plate.

2. Leave paper die cut in the die.

3. Turn over Spellbinders Die, placing it on Sizzix® cut pad.

4. Place Spellbinders Tan Embossing Mat on top of Spellbinders Die.

5. Place paper shim on top of Tan Embossing Mat.

6. Push through Sizzix® Machine to emboss the Spellbinders Die.

Enjoy Spellbinders embossed die cut!

NOTE: It may take several presses to cut larger Spellbinders Dies.

 

Revolution™ by QuicKutz®

This machine may be used to cut and emboss Spellbinders dies.

How-To Cut with Spellbinders Dies

1. Place die onto Revolution platform (cut side up).

2. Place paper or cardstock on top of die.

3. Place acrylic cutting mat on top of die.

4. Roll thru Revolution machine.

How-To Emboss with Spellbinders Dies

1. Remove acrylic cutting mat.

2. Leave die in place with die cut still inside die.

3. Place Spellbinders tan embossing pad on top of die.

4. Place Acrylic embossing mat on top of tan pad.

5. Roll thru Revolution machine.

 

Click here to buy Nestabilities